* Circuit power: Max. 150W
* Charge current range: 0.1-7.0A
* Discharge current range: 0.1-5.0A
* Current drain for balancing Li-po: 300mA/cell
* NiCd/NiMH battery cell count: 1-27cells
* Lithium battery cell count: 1-8cells
* Pb battery voltage: 2-36V
* Net weight: 480g
* Dimension: 163.8x106.2x45.6mm
* High-power and high-performance circuit
B8+ employs the circuit that has maximum output power of 150W. As a result it can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program. Universal connector, pitch 2.54mm,compatible for Align XH, Kokam/Graupner/Robbe Packs from 2 cells to 8 cells.
* Maximum Circuit Power Chart
The actual amount of charge current feeding to the battery is automatically be limited to 150 Watts, so not to exceed the charger's maximum rated charging power. The maximum discharge power is approximately 20 Watts. The discharge current delivered to the charger is limited by charger's internal thermal sensor for maximum discharge current. If the internal temperature over 80 Celsius, the charger will be cut off and "TEMP OVER ERR" will show on the LCD. In this case, please decrease discharge current.
* Individual voltage balance for Lithium batteries inside
B8+ has an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.
* Lithium battery "Fast" and "Storage" mode
You can charge Lithium battery for special purposes. "Fast" charge reduces the charging time of Lithium battery and "Storage" mode controls the final voltage of the battery to be suit for long time storage.
* Data Store/Load
For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
* PC based analysis using USB communication
For technical expert, B8+ offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.(*PC analysis software and USB Link wire are not included)
313 out of 317(99%) customers would recommend this product to a friend.
Here you can add do you think is more reasonable keywords,allowing you to find products.