* Operating voltage range: DC 12.0-18.0 Volt
* Circuit power: Max. Charge power 400Watts
* Max. Discharge power 25Watts
* Charge current range: 0.1-20.0A
* Discharge current range: 0.1-5.0A
* Current drain for balancing Li-Po/Ion/Fe: 300mA/cell
* Li-ion/Fe/Polymer cell count: 1-6cells
* NiCd/NiMH battery cell count: 1-15cells
* Pb battery voltage: 2-20V
* Net Weight: 720g
* Dimension: 145x141x60mm
* Delta-peak sensitivity:
The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
* Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful forthe NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
* Processing time limit
You can also limit the maximum process time to avoid any possible defect.
* Data store/load
For user's convenience, it can store maximum 10 data of different batteries. You can establishthe data contains program setting of the battery to charge or discharge. These data can be called back at any time you need and the process can be executed without program setting.
313 out of 317(99%) customers would recommend this product to a friend.
Here you can add do you think is more reasonable keywords,allowing you to find products.