* AC Input: 100-240Volt
* DC Input: 11-18Volt
* Circuit Power: Max. Charge Power 50W
* Max. Discharge Power 5W
* Charge Current Range: 0.1-6.0A
* Discharge Current Range: 0.1-1.0A
* Current Drain For Balancing LiPo: 300mA/cell
* NiCd/NiMH Battery Cell Count: 1-15Cells
* LiPo/LiFe/Lilon Cell Count: 1-6Cells
* Pb battery voltage: 2-20V
* Net Weight: 433g
* Dimension: 135x112x60.9mm
* Security operating system
e6650 has a security operating system, and has auto functions to control battery charge rate and times in order to protect your Lithium battery from being overcharged or exploded. When the temperature ups to high or time is too long, it will terminated automatically and initiate an alarm if there is any malfunction. It's a considerate & convenient charger for users.
* Internal independent lithium battery balancer
e6650 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
* Balancing individual cells battery discharging
During the process of discharging, e6650 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
* Adaptable to various type of lithium battery
e6650 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
* Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and
protect useful time of the battery.
* Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
* Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
* Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
* Data store/load
The maximum five batteries' data can be stored for users' convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
* Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery's activity.
313 out of 317(99%) customers would recommend this product to a friend.
Here you can add do you think is more reasonable keywords,allowing you to find products.